PROTECTIVE SLEEVE FOR AVERY BLINDS
When I first bought an Avery duck blind for my boat the little red balls
with the bungee cords that held the blind down were a hassle and time
consuming chore at the boat launch. Performing this task with frozen hands
was
Enough to make a hunter figure out an easier and quicker way to complete
this task. So I went to a local business that specializes in boat covers
and
Had him sew me some protective sleeves for my Avery blind.
Here is a typical blind when it is in your boat.
This is the bottom side of the protective sleeve. It has to long zippers
and some ties on the ends.
Simply slide your protective sleeve under your blind and tuck everything
together.
Than zipper the sleeve all the way down to the ends tucking in the fabric
from the blind.
Now your blind is protected from the elements and the wind from going down
the road is not beating the blind up. The set up and down time on my blind
is much quicker and my Avery is protected. Remember if you were hunting in
the rain that day an Avery blind needs to be dried out properly.
-Wild Bill-
|